Your task in this project is to implement a maze rendering program, not too far removed from those used in computer games of the first-person variety. Read this entire document carefully before beginning, as it provides details of the required implementation and various tips.

A maze consists of rectangular cells separated by edges. The edges may be either transparent or opaque. The viewer is supposed to see through transparent edges into the neighboring cells, and they should not see through opaque edges. Each edge is assigned a color (which is meaningless for transparent edges).

The maze is described as a 2D structure **assumed to lie in the XY plane**. To make it 3D, each edge is extruded vertically from the floor to the ceiling. **The floor is at z=-1 and the ceiling is at z=1.** Each wall should be drawn with its assigned color.

Associated with the maze is a viewer. The viewer has an (x,y,z) location, a viewing direction, and a horizontal field of view. The view direction is measured in degrees of rotation counter-clockwise about the positive z axis. The horizontal field of view is also measured in degrees. For the project, the viewer's z will always be 0.

The maze file format consists of the following information (also look at one of the example mazes):

- The number of vertices in the maze, nv. Each edge joins two vertices.
- The location of each vertex, specified as it x and y coordinates. The vertices are assumed to be numbered from 0 to nv - 1.
- The number of edges in the maze, ne. Remember, there is an edge between every cell, even if that edge is transparent.
- The data for each edge: the index of its start vertex, the index of its end vertex, the index of the cell to the left, the index of the cell to the right, a 1 if the edge is opaque, or 0 if transparent, and an RGB triple for the color. The left side of an edge is the side that would appear to be on your left if you stood at the start of the edge and looked toward to end. If there is no cell to the left or right, an index of -1 is used. The edges are assumed to be numbered from 0 to ne - 1.
- The number of cells in the maze, nc.
- The data for each cell, which consists of the four indices for the edges of the cell. The indices are given in counter-clockwise order around the cell.
- The view data, consisting of the (x, y, z) viewer location, viewing direction and the horizontal field of view.

## Source code can be found in the MazeFramework.rar. Example Executable code is in exe.

Several classes have been provided. Together they build two programs. The first program creates mazes in a certain format. The second is a skeleton maze renderer. The code is reasonably well documented, but part of the project is figuring out how the given code works and how to integrate your code into it. The programs are described below. To build them, set the appropriate startup project in Visual Studio and build.

- BuildMaze

The BuildMaze program provides a simple user interface for building mazes. The user specifies the following parameters:

**Cells in X:** The number of cells in the x direction. **Cells in Y:** The number of cells in the y direction. **Cell X Size:** The size of the cells in the x direction. **Cell Y Size:** The size of the cells in the y direction. **Viewer X:** The initial x location of the viewer. **Viewer Y:** The initial y location of the viewer. **Viewer Z:** The initial z location of the viewer. **Viewer Dir:** The initial viewing direction, given in degrees of rotation about the positive z axis (the standard way of specifying a rotation in the plane). **Viewer FOV:** The horizontal field of view of the viewer.

The **Build Maze** button builds a maze with the given parameters and displays it. The **Save Maze** button requests a file name then saves the maze to that file. The **Load Maze** button requests a maze file to load and display. **Quit** should be obvious.

- RunMaze

The RunMaze program provides a skeleton for the maze walkthrough that you will implement. As provided, it displays both a map of the maze and an OpenGL window in which to render the maze from the viewer's point of view. On the map is a red frustum indicating the current viewer location, viewing direction and field of view. The map is intended to help you debug your program by indicating what the viewer should be able to see.

To move the viewer, hold down a W/S/A/D and Left/Right Arrow in the OpenGL window. Key W or Key S is translated as forward or reverse motion of the viewer. Key A and Key D is translated as move Left and Right. Left and Right Arrow motion changes the direction of view. As the skeleton exists now, the viewer will move in the map window to reflect the Keyboard Control.

The system performs collision detection between the wall and the viewer to prevent the viewer from passing through opaque walls. You should examine the code that does that to see an implementation of clipping that clips a line segment to an edge using an approach similar to Liang-Barsky clipping. The RunMaze program “do not” keeps track of which cell the viewer is currently in, which is essential information for the cell-portal visibility algorithm you must implement.

You should pay particular attention to the function **Mini_Map** in **OpenGLWidget.cpp** that sets up the OpenGL context for the window. As you will read later, all of the drawing you do in this project must be in 2D, so the window is set up as an orthogonal projection using the special OpenGL utility function **gluOrtho2D**. The Mini_Map function also draws the projection of the ceiling and the floor of the maze. You should be able to reason as to why is it safe to treat the floor and ceiling as infinite planes (hint: the maze is closed), and why those planes project to two rectangles covering the bottom and top half of the window. You do not need to change this function.

- C++ Classes

This document will not go into details of the C++ classes provided. You should spend a considerable amount of time perusing them to figure out how everything works, and too look for little functions that will be useful in your implementation, such as functions to convert degrees to radians and back again (recall that all the C++ trigonometry functions take radians).

## Produce the viewer's view of the maze. You must extend the function OpenGLWidget::Map_3D to draw what the viewer would see given the maze and the current viewing parameters. Note that the function is passed the focal distance, and you also have access to the horizontal field of view. Your implementation must have the following properties.

- You must use the Cell and Portal visibility algorithm to achieve exact visibility. In other words, apart from drawing over the floor and ceiling, no pixel should be drawn more than once. The algorithm is given in psuedocode below.

Note that you should implement the following functions. The function **Draw_Cell(C, F)** is initially called with the cell containing the viewer, and the full view frustum. The **neighbor(C,E)**function returns the cell's neighbor across the edge. Note that drawing a 2D edge means drawing a wall in 3D.

- You are only allowed to use OpenGL 2D drawing commands. In other words, any vertices you specify should use
**glVertex2f, glVertex2fv, glVertex2d or glVertex2dv**only. You should use**glBegin(GL_POLYGON)**to draw polygons, and**glColor3f**or**glColor3fv**to specify the polygon color. We will check for other OpenGL calls when we grade. - As an side effect of the 2D restriction, you must do your own viewing transformation. That is, you must take points specified in world space (where you will do the visibility) and transform them all the way into screen space (where you will draw them.) The transformation will consist of a translation and rotation to take the points from world to view space (with the origin at the viewer's location) and then a perspective division to take the view space points into screen space. Note that you are given the focal distance to make things easier, but you must still take care of several small details. Note that you can do all the transformations using basic transformation matrices followed by simple persepctive. You DO NOT need to construct general purpose viewing transformation matrices.

- The visibility algorithm is a 2D algorithm in this case, because all the walls are vertical and the viewer is looking horizontally. That also means that all the pieces of wall that you draw will have vertical left and right edges. They will not have horizontal top and bottom edges due to perspective effects.
- Implement a
**Frustum**class that stores information about a viewing frustum, and has a method for clipping a frustum to an edge. The easiest way to represent a frustum is as a point for the viewer's location, and two edges for the left and right "clipping lines" of the frustum. There is no near and far clip lines in this project. - Implement a function in the
**Edge**class or the**LineSeg**class that clips an edge to a given view frustum. You will have to work out a way to compute the intersection point of a line segment with an infinite line in 2D space. Start by writing out the equations of the lines in parametric coordinates. There is a function in the LineSeg class that may help get you started. - It is easiest to begin with a 1 by 1 maze, in which case there is no recursive step. That gives you the opportunity to debug the transformations and projection before getting into the details of manipulating view frustums.
- To do the projection, first translate the point so that the viewer is at the origin (subtract the viewer's location from the point.) Then undo the viewer's rotation direction by rotating the point. Then do the perspective divide (using the simple perspective projection from the notes, suitably modified.)
- Note that in OpenGL 2D drawing, x is to the right and y is up. When you do the transformation above, you end up with y to the left, z up and x into the screen. You have to fix this problem.

It cannot be stressed enough: This project can be completed in somewhere between one hundred and five hundred lines of code. Spend a lot of time thinking about what you are trying to do with each piece of code. And spend a lot of time looking at the code you are given. Start with pen and paper, because there are a lot of small pieces of math that you need to work out. Grading and Submission

The project will be graded out of 50. You get:

- 20 points for projecting a wall onto the screen with perspective projection and drawing it.
- 10 more points for correctly clipping walls to the view, for a single cell maze.
- 20 more points for doing the recursive visibility.

Submission will work similar to project 1. Grading of this project will be by demo in a series of face-to-face grading sessions.

You must work alone for this project.